[an error occurred while processing this directive]

Contact: Matt Wiggins (wiggs@neons.org)<br>

<ol>
<li>Parts list: 4856291 (DOHC 'Oil Rescrictor')</li>


<li> Open hood and locate the  PVC tube that comes from the drivers side
of the header.</li>
<center><a
href="http://neons.org/~wiggs/neon2x/Mvc-688x.jpg"><img
src="http://neons.org/~wiggs/neon2x/Mvc-688x-thumb.jpg"></a></center>
<li> Use a pair of needle nose pliers to open the clasp that cinches the
rubber tubing to the metal one.

<center>
<a href="http://neons.org/~wiggs/neon2x/Mvc-683x.jpg"><img
src="http://neons.org/~wiggs/neon2x/Mvc-683x-thumb.jpg"></a>
</center>

<li> Gently remove the rubber tube.
<center>
<a href="http://neons.org/~wiggs/neon2x/Mvc-687x.jpg"><img
src="http://neons.org/~wiggs/neon2x/Mvc-687x-thumb.jpg">
</a></center>

<li> Take P/N 4856291 and place it into the metal tube, it should fit in
and click into place. Be careful not to press too hard or you will damage
the metal tube.

<center>
<a href="http://neons.org/~wiggs/neon2x/Mvc-686x.jpg"><img
src="http://neons.org/~wiggs/neon2x/Mvc-686x-thumb.jpg"></a>
</center>

<li> Reverse the order and re-assemble



</ol>

<p>This should all take less than 5 minutes</p>

Parts cost: P/N 4856291  $6.50


[an error occurred while processing this directive]